1976 Buick Skylark Drag Car Recent Paint Rare car, No rust

1976 Buick Skylark

The car is NOT STREET LEGAL. It is a race car only.

Video Link cut and paste the following links:
https://youtu.be/6uzpYK6drb0
https://www.youtube.com/watch?v=DJe_eOH8WWs
1976 Buick Drag car. This car was designed on the computer and then built. Interior removed to lighten vehicle. Current weight is 2700 lbs. Fresh paint. All rust has been repaired with composite material. No rust anywhere. 1974 Chevrolet Corvette engine, 5.7 L 4 bolt main with a steel crank. Edelbrock Performer intake with Holley 780 double pumper carb. Holley Blue electric fuel pump. Custom ram intake. Intake runners come from the headlights to a custom designed plenum on the carb. Good for 15-20 hp at 100 mph. See the photo with the intake and the computational fluid dynamics analysis with it. Transmission is a turbo 350 that was modified and built by JW transmissions in Rockledge, Florida. Will handle the torque from a Modified BBC. Rear is is a Chevrolet big 10 bolt posi with 3.73 gears. Traction bars and line lock on the front brakes to heat up the slicks.The car has a custom designed sub-frame connector to be able to withstand the torque of large displacement high torque output engines. Frame rigidity has been increased by an order of magnitude.
Have new in the box hardened axles with clips to satisfy NHRA rules. Exhaust is open headers. Tires in the front less than 10 miles with lightweight 2 piece rims. Rear slicks are new with 0 passes and new rims.
Custom A-arms in the front. Radiator has anemometers installed to show airflow across the radiator. Radiator is new. Disc brakes up-front with drums in the back. All rebuilt with new lines and master cylinder and calipers/wheel cylinders. NHRA racing seat with new 5 point harness. Roll cage fulfills NHRA regulations and was custom designed and built. battery in the trunk with 0 gauge battery cables and master kill switch on rear of the car that is also a charging location. LED lights front and back. Back window and rear side glass is Lexan. Have the driveshaft hoop but not installed.
The car to be turn key is 90% complete. Wiring needs some work, and tuning on the carb. Recent front end alignment and all tires balanced.

Options

Car Minus engine and transmission

or

car with engine/transmission essentially turn key
Also have new in the box CNC aluminum cylinder heads, Edelbrock performer rpm INTAKE NEW IN BOX, high performance Competition Cam with lifters new in box and screw in head studs with roller rockers. These parts do not come with the car and the price negotiable. HOWEVER, THIS WILL MAKE THE CAR MORE COMPETITIVE.
Also have 1972 475 cubic inch BBC that is highly modified. $5000 for engine
Here is this engine in the car:
https://www.youtube.com/watch?v=2CaL3-tfjo8